ProBlock – Pre Sealer
$116.95 – $415.00
Our Pre Sealer for porous stone & tile is an economical, natural look, breathable sealer. It is a water based penetrating sealer designed to resist staining caused by water soluble minerals (including picture framing effect) which are normally absorbed through the back of the stone during installation. It also helps resist efflorescence migration. ProBlock is not an adhesive bond breaker.
Key Features:
- Ideal for six sided pre sealing (dip sealing)
- Allows moisture vapor transmission
- Works excellent as a grout release
- Is not an adhesive bond breaker
- Safe to use, water-based, low VOC
For use on:
As a pre sealer or grout release for all natural stone such as granite, basalt, marble, limestone, sandstone, bluestone, travertine, slate etc. concrete pavers, brick and masonry. For interior and exterior use.
How to Pre Seal Stone on all Six Sides (Dip Seal)
Technical Article:
Benefits of Sealing all Six Sides
Six Sided Sealing with Adhesion
Case Study:
Coverage:
Approximately 4 m2 – 14 m2 , per liter, per coat when applied to all 6 sides, depending on type of surface porosity, surface temperature, humidity and method of application.
Limitations:
- Not for use as a final top surface sealer
- Do not allow sealer to come in contact with any non-recommended surface
- If product is allowed to dry on surface, a white film may form. If this occurs, scrub with water and a white nylon pad
- ProBlock is not a waterproofing agent
- Not for use on the top surface prior to the application of Enhancing Sealers such as Aqua Mix® Enrich’N’Seal™ or Aqua Mix® Stone Enhancer
Safety Data Sheet (.pdf)
Technical Data Sheet (.pdf)
