CEG Lite™ 2-Part Epoxy Grout – Part B

CEG-Lite™ 100% Solids Commercial Epoxy Grout provides chemical and stain resistance with a fast cure time for a quick return to service. Its lightweight formula makes it easier to spread than typical epoxy grouts and is water-cleanable. CEG-Lite exceeds ANSI A118.3 performance requirements, is suitable for use on vertical joints without an additive, and can also be used as a mortar.

Its two-component formula combines a Part A pigmented hardener with a Part B consisting of resins and lightweight aggregates. CEG-Lite is compatible with both CEG-Lite Part A and CEG Part A epoxy grout color pigment and hardener products. Formula is patent-pending.

Key features

• Color consistent, stain and chemical resistant
• Easy to spread and clean-up
• No sagging in vertical joints
• Contains recycled LEED contributing materials

Uses

• CEG-Lite can be used as both a grout and as a setting mortar
• Use with virtually any tile – vitreous, semi-vitreous or impervious tile including ceramic, mosaic, quarry, pavers, cement, porcelain, glass, brick, mini-brick, precast terrazzo and natural stone, including green marble Use to fill joint widths from 1/16″ to 1/2″ (1.6 – 13 mm)
• May be used for both floor and wall installations Interior and exterior applications.
• When used as a grout on exterior applications, color variations may occur over time.
• Countertops, backsplashes, tub and shower areas, sunken tile tubs and swimming pools that are continually wet
• For use in areas requiring chemical resistance.
• For installations with high chemical resistance requirements, see chemical resistance chart for details.

Suitable substrates (when used as a bonding mortar)

• Plumb and true masonry, concrete, cured Portland cement mortar beds
• Bonds directly to brick, ceramic tile, cementitious backer units, steel, glass and fiberglass

Benefits of product in the installation

• 2-Part 100% Solids Epoxy
• No shrinkage
• Color consistent and stain resistant
• Does not require sealing
• Easy to spread and water clean-up
• No additive needed for critical grouting applications
• Contains recycled materials that may contribute to LEED® credits Exceeds ANSI A118.3 (100% Epoxy) performance requirements